Call us now
Basket: 0 item(s)

Your basket is empty

Spend £250 Or More & Get Free Delivery/Save 10% On Towel Rails *Discount Applied To Towel Rails Only* Spend £250 Or More & Get Free Delivery/Save 10% On Towel Rails *Discount Applied To Towel Rails Only*

Milano Thermostatic Aluminium Shower Tower with 6 Body Jets

Ref: TRUSP302



Availability: In Stock

  • 10 years guarantee
    ON ORDERS ABOVE £250.00

Essential Extras Available (will be displayed when product added to basket)


The Milano aluminium thermostatic shower tower is sure to inject designer style into your bathroom or en-suite. Easy to install and use, the thermostatic shower panel delivers an amazing showering experience that's sure to leave you feeling awake and ready to start your day.

Incorporating thermostatic technology for peace of mind, the stylish shower tower features six massaging body jets, fixed shower head and a multi-function handset with hose.

The handshower is made from ABS. ABS is strong and durable, and resistant to heat and chemicals. ABS is also lightweight to help prevent damage to the surface of a shower tray or bath.

Milano Thermostatic Aluminium Shower Tower Features:

  • A thermostatic shower control valve for comfort and safety
  • The valve features an anti-scald device in case of cold water failure
  • Rubberised spray holes for easy cleaning
  • Multifunction ABS hand shower
  • Fixed head shower
  • 6 circular body jets
  • Easy to install and suitable for corner or flat-to-wall mounting- comes with fitting kits for either
  • Suitable for combi boilers
  • The hot and cold water feeds required are ½" BSP male thread
  • Flexible connectors with ½" BSP female nuts are supplied to connect from the water feed to the shower valve
  • Please note: This shower system requires a minimum water pressure of 2 bar for a superior showering experience
  • Please note: The fixed head, hand set and body jet functions do not operate simultaneously.

Dimensions of the Milano Thermostatic Aluminium Shower Tower:

  • Shower Panel (W x D x H): 250mm x 425mm x 1460mm (9¾" x 16¾" x 57½")
  • Panel Thickness: 70mm (2¾")
  • Shower Head (L X W): 180mm x 180mm (7" x 7")


Weight (kg)14.2
Recommended Water Pressure HP2
Number of OutletsThree
Inlet Size1/2" Flexible Tails
Simultaneous FunctionsNo
Width (mm)250
TypeShower Tower
Temperature controlThermostatic
Height (mm)1460
Projection (mm)424
Guarantee10 Years


Average Customer Rating Milano Thermostatic Aluminium Shower Tower with 6 Body Jets has a rating of 5 stars 5 stars (12 reviews)

“seems to be a solid product”

so far seems good but long term will have to wait and see

Reviewed by Anonymous on 15 January 2018

“Mr M Holderness”

A nice looking product but, difficult to fit correctly as only one mounting bracket supplied, this does not hold the unit to the wall at the base and we are left with a gap. Also the rack and shelf is only useable when fitting in a corner but the plastic bungs to fill the holes are to big for them, so it hat to be fitted without the shelf. This really needs 2 brackets.

Reviewed by Mehole on 31 July 2017

“perfect product for corner shower unit”

Product was exactly as described and easy to install. It's exactly I required for my corner shower unit.

Reviewed by RS on 28 July 2017

“Elegant and efficient”

Had to find a shower panel to replace my old Newteam which had given up the ghost. This was easy to fit and, although narrower than the old one fits the space perfectly. Looks really smart and I like the overhead square shower head which delivers an excellent flow of water. All in all 10 out of 10 for the item. Thank you Big Bathroom Shop.

Reviewed by Col on 26 April 2016


Pressure is low and when u need to turn the control panel to left increases the pressure but then the water is very very hot. how can u control the water temperature and increase water pressure

Additional comments from The Team

Hi Mr Joban,

Thanks for taking the time to leave feedback. It sounds like you need to calibrate the shower panel:

• Fully turn on the panel water flow. Note: Ensure the hot water is above 60⁰C (140⁰F) and you have more than 2 bar (30 psi) pressure.
• Set the temperature control handle at the 38⁰C position.
• Remove the temperature control handle by loosening the fixing screw.
• Relocate the temperature control handle approximately 3mm back onto the splined shaft. Hold in position
• If the pre-set temperature is to hot turn the temperature control handle anti-clockwise to obtain the 38⁰C (100⁰F). Allow the temperature to stabilise for 10 seconds after each movement.
• If the pre-set temperature is to cold turn the temperature control handle clockwise to obtain the 38⁰C (100⁰F). Allow the temperature to stabilise for 10 seconds after each movement.
• When set at 38⁰C (100⁰F) carefully remove the temperature control handle on the splined shaft aligning the 38⁰C (on the handle) with the line located on the panel.
• Secure the temperature control handle with the fixing screw.

Any problems please don't hesitate to contact our customer service team.

Kind Regards

The team

Reviewed by jOBAN on 19 November 2015

It is exactly what it is advertised as.

Reviewed by kesbuilders on 24 October 2015

“Simple and smart installation”

Before starting this project I was anxious about self-installation. The instructions also worried me because they did seem to match the product delivered hence only 4 stars. However once I got started it was relatively simple, and everything went into place well once I had matched the parts to the plan. The only piece leftover was corner bracket and a few washers but there were more washers than the instructions stated any way. It does exactly what we need it to do!

Reviewed by PaulR on 09 October 2015

“Fits the corner nicely”

This is the 3rd one of these that we have brought over the years.

Mainly because it is the only one we can find that fits into a corner that is a reasonable price.

It gets lots of use, which is why we are on our third one!!!

Only issue we have had is on the last one the thermostat knob became very stiff.

This one is improved as it has a better temp setting.

Dead easy to install even the flex hoses on the back are marked for hot and cold.

Reviewed by PTH1 on 10 March 2015

A good product at a very good price.

Reviewed by Anonymous on 17 October 2014

“Excellent, smart product”

A very good value product which matched expectation. Thank you.

Reviewed by Anonymous on 01 October 2014

“Great shower!”

I bought this as a replacement and I love it! Works well and easy to use.

We had a small issue when initially installed as the pipes were slightly kinked so the water wasn't running correctly. We added slightly longer pipes to the back and were more careful with them

It now works perfectly!

Reviewed by Anonymous on 22 April 2014

“Great value quality product”

The shower panel is of a good quality and it looks great when it is installed. The large shower head has a very good flow of water and makes for an enjoyable shower. The jets work well too and our children love the other shower head because they can move it where they like. Installation was a little tricky because we were replacing another shower panel so the inlet pipes were slightly in the wrong place. We have fitted it in a corner position and it looks fantastic. We would not hesitate to recommend this product. Installation instructions could be made clearer.

Reviewed by Anonymous on 10 January 2012

Have you purchased the Milano Thermostatic Aluminium Shower Tower with 6 Body Jets? If so we'd love to know what you think of it.

* required fields

You're reviewing: Milano Thermostatic Aluminium Shower Tower with 6 Body Jets

5 stars

4 stars

3 stars

2 stars

1 stars
(very poor)

Enter your name/nickname here

or tick here to remain anonymous

* Please complete the capture below to prove you are not a robot:


Delivering your Items

Additional charges may be applicable to Highlands, Lowlands and Islands – Learn More

Returning of Items

Here at we operate a 14 days return policy, so if you are not completely satisfied with your purchase(s) you'll be able to return it within 14 days of its delivery.

To speak with a member of our customer services team call 0345 122 7569 (dial +44 345 122 7569 for calls made from outside the UK).

Our hotline is open Monday to Thursday 8.30am to 9pm. Friday and Saturday 8.30am to 5pm. Sunday Closed. Full details of our returns policy can be found here.

Payment Options

We use full 128-bit encryption technology to keep your order and payment details safe.